You can paint over pressure-treated wood. However, you’ll need to take precise steps to ensure that you’re going to get satisfactory results. Just the tips below to avoid problems.
Painting Pressure Treated Wood
Before painting pressure-treated wood, it is pertinent to give it enough time to dry. Unfortunately, it takes a bit longer to dry. Kiln-dried lumber dried faster. If you recently purchased the wood from a store, you’ll need to let it dry a bit longer. It can take several weeks or months for the wood to sufficiently dry. Before you can paint it, your wood needs to be able to absorb water. In addition to this, you need to use the correct paint type. Make sure that you’re starting with a latex primer. Then, you can use exterior latex paint.
Preparation
Once you’ve confirmed that the wood is ready to paint, you’ll need to apply the primer. You can do so using a brush or roller. It is pertinent to give the primer plenty of time to dry. Then, you can begin applying the exterior latex paint. In most cases, you’ll need to apply two or more coats. Once you’ve done that, you’re finished.
Staining Pressure Treated Wood
You’ll also be able to stain pressure-treated wood. Stain is better than paint because the wood is going to absorb it. The only downside is that stain comes in fewer colors. Plus, it isn’t going to fill in tiny gaps. Nevertheless, using a stain is a good option because it’ll make the wood look much better. If you’re going to use stain, it is best to use an oil-based stain that is semitransparent.
Working With A Professional
Remember that you can work with a professional to take care of this issue. It is a good idea to hire a professional so you can guarantee that you’re going to get outstanding results.